HITSA_Egedal_miljø_2_

EGEDAL MILJØ 2 Recycle Bin

Design VE2

EGEDAL MILJØ 2 is a quality litter bin, encouraging everyone to sort their waste when out and about. The bin is modular and installations can be designed to suit specific needs. Robust materials and timeless design make it long-lasting in every sense. It has also been designed so that service staff can empty it without any lifting.

EGEDAL MILJØ 2 is made from hot-dip galvanised steel. It is also available clad with smooth wooden slats, giving it a warm and inviting look – go to this page to view EGEDAL MILJØ 2 with wood cladding.

The bin can be set up to form a recycling station with 2, 3 or 4 modules in a single row or 4, 6 or 8 modules in a double row. If you need even more fractions, talk to our consultants – EGEDAL MILJØ can be adapted with any number of modules. Each module holds 80 litres.

A single row of EGEDAL MILJØ bins can be supplied with openings from one or both sides. The front panel provides space for waste-sorting pictograms.

Modules can be added or removed if recycling needs change. A 2-module set-up can easily become a 3 or 4-module installation, or vice versa. The waste-sorting pictograms can also easily be replaced.

As a result, EGEDAL MILJØ offers great flexibility, as it can be adapted to suit changed legal requirements and varying user needs.

Flexible waste sorting in urban spaces

EGEDAL MILJØ 2 is made from hot-dip galvanised steel. It can be supplied with a plain, hot-dip galvanised finish or with a powder coating in any RAL colour. The top, casing and front panel all allow use of colours to support a particular design concept or communicate waste fractions.

The bin is high quality and will stand up to wind and weather and the rigours of urban life.

The design of EGEDAL MILJØ takes into account working procedures for service staff. Each bin module features convenient swing access – both the hatch and the bag holder. This means no lifting is required when emptying.
The bin can be equipped with a sensor (that measures the level of rubbish in the bin and thus the need for emptying).

Waste sorting in pedestrian zones or parks

EGEDAL MILJØ is part of the EGEDAL range and is also available as a stand-alone litter bin. This enables you to achieve a uniform overall look with different models. View EGEDAL litter bin with wood cladding here and EGEDAL litter bin in steel here.

The range has been designed for public spaces, where flexible waste sorting is needed. Both private and public enterprises often need to adapt their waste-sorting facilities on an ongoing basis. EGEDAL MILJØ allows the set-up to be adjusted in the event of changes to user needs, official requirements or other factors.

The EGEDAL range has been designed by Danish design studio VE2 in collaboration with HITSA. The aim was to create waste-sorting products that offer a new, high standard of aesthetics.

Contact us

Call us
Tel: +45 7557 4155

E-mail us at
hitsa@hitsa.com

Downloads

Technical drawings See drawings

EGEDAL MILJØ 2 RECYCLE BIN

• 80 litres per module
• Single row: 2, 3 or 4 modules
• Double row: 4, 6 or 8 modules
• Available with openings at the ends
• Single row available with single or double side openings
• Same range as the EGEDAL stand-alone litter bin
• Side-hinged hatch with bag holder for easy emptying
• Also available in RAL colours
• Opens with a triangular key – locks automatically when closed
• Can be equipped with a sensor to measure fill level
• Optional extra: Recycling labels

MATERIALS:

• Hot-dip galvanised steel
• Also available in powder-coated, hot-dip galvanised steel

DIMENSIONS:

Hatch/casing: 3 mm steel plate
Top: 8 mm steel plate
Front panel: 2 mm steel plate
Base height: 50 mm

INSTALLATION:

• Can be cemented in or bolted to the ground
• Recommended base dimensions WxH: 400 x 300 mm per module (length depends on number of modules)
• Distance from ground to top edge: 900 mm

EGEDAL MILJØ 2 drawings

Forgot your password?

|