Spærrebom ved sti
Spærrebom med hængelås
Spærrebom afskærmer sti i boligområde

TYPE A5 Barrier

Design HITSA

A5 is a popular type of barrier from HITSA. It can be used as a boundary marker, barrier, etc.

The length of the A5 barrier arm can be adapted to customer requirements. The maximum length is 2.5 metres per barrier arm. Use a set of two barriers to form a gateway for pedestrians, cyclists and scooter users to pass through when coming up to a road.

A5 is made from Ø 60 mm tubular steel, while the outer end is Ø 48 mm tubular steel. It is 1 m high. It is possible to purchase red & white-striped reflective panels or reflective strips in white, red or yellow to make the barrier more visible.

A5 has four locking positions. It can rotate 360 ° and can be locked in four different positions. A5 has a very reliable lock.

Padlocks for the locking positions are not included.

A5 is typically used for path networks and green areas, where vehicle access is occasionally needed. This could be, for example, in connection with snow clearing or sweeping. A5 can be opened to allow access, unlike A2 and A3 fixed barriers. The actual barrier arm of A5 can rotate 360 ° and can be locked in the selected position.

Barrier in hot-dip galvanised steel

A5 barriers from HITSA are produced at our own steelworks. This allows us to adapt products as required to suit customer needs. Contact us to find out more about the available options.

A5 is made from hot-dip galvanised steel, ensuring a long useful life and minimal maintenance. If you don’t want a galvanised finish, you can opt for powder coating instead, with a wide range of colours to choose from.

All steel components in HITSA’s products are hot-dip galvanised, including those that are subsequently powder-coated rather than being delivered with a plain, galvanised finish.

Contact us

Call us
Tel: +45 7557 4155

E-mail us at
hitsa@hitsa.com

Downloads

    Technical drawings See drawings

    TYPE A5 BARRIER

    • Swing barrier
    • 4 locking positions – suitable for padlocking
    • The length can be adjusted to suit customer requirements
    • Max. length: 2500 mm
    • Optional extra: Red, yellow or white reflective strip
    • Also available in any RAL colour

    MATERIALS:

    • Hot-dip galvanised steel
    • Also available in powder-coated, hot-dip galvanised steel

    DIMENSIONS:

    Barrier arm: Ø60/49 mm steel tube
    Outer post: Ø90 mm steel tube
    Inner post: Ø76 mm steel tube

    INSTALLATION:

    • To be embedded
    • Recommended base dimensions: Ø400 x H900 mm
    • Distance from ground to top edge: 1000 mm

    TYPE A5 BARRIER drawings

    Forgot your password?

    |