NOLI Bike Rack

Design HJØRRING KOMMUNE

Our NOLI bicycle rack is based on our classic NOAH rack. NOLI features the same sturdy quality and simple design as NOAH. The difference is that the NOLI wheel holders curve inwards, allowing space for lights and other equipment attached to the wheel hub.

NOLI is a solid bicycle rack that is easy to maintain.

The half-moon-shaped wheel holders are made from 16mm-thick steel tubing. They are therefore more robust than thinner racks to stand up to the rigours of an urban environment, such as late-night revellers, boisterous football fans and more.

The struts are inserted into tubular sockets on the bollards, so they can easily be replaced. Once the bollards are embedded in the ground, the struts are inserted into the connectors and secured. This makes NOLI a flexible bicycle rack, with struts and wheel holders that can be replaced without any problem.

Numerous installation options for NOLI bicycle racks

The NOLI wheel holders can be attached to struts, a wall or stand-alone SNAP bollards. SNAP is a good way of making use of a corner location or other confined space. SNAP or a rounded bollard rack also allows the bicycle parking installation to follow the curves of a flower bed or pavement.

The holders can be set at an angle to save on depth and width. The distance of 50 cm between wheel holders ensures that handlebars do not become entangled. We can also supply NOLI with 60 cm between wheel holders, as recommended under DGNB sustainability certification.

The struts can be attached to a number of different bollards. If installing NOLI in an area with pedestrian and bicycle traffic only, a standard LENTA U Ø89 bollard may be the appropriate choice. If installing it in a street or car park location with motor traffic, you can use a more robust bollard with space for reflective markings, e.g. LENTA 114.

The rack is available as single-sided modules with 5 or 6 parking spaces or double-sided modules with 10 or 12 spaces.

Bicycle racks for all types of tyres

Our NOLI bicycle rack is suitable for all tyre thicknesses from racing bikes to granny bikes and mountain bikes. This is thanks to the fact that the wheel holders are angled outward. The tyre is held in two places, so that the front wheel remains steady and does not jiggle in the holder.

All racks of this type are hot-dip galvanised and therefore require no maintenance. In addition, the rack can be powder-coated, so the colour and style coordinate with the design concept of the particular business, housing association or municipality. Powder coating provides an extra layer of protection against rust. However, paintwork is likely to become worn from bicycle tyres being pushed in and out, but it can be refreshed if needed.

NOLI can be combined with our LOCKT lock bracket, making it easy for cyclists to lock their bike frame securely to the rack.

Contact us

Call us
Tel: +45 7557 4155

E-mail us at
hitsa@hitsa.com

Downloads

Technical drawings See drawings

NOLI BIKE RACK

• Angled clamps that suit all types of tyre
• Modular, so can be assembled in the length required
• Available vertical (90°) or angled (45°)
• Also available as an individual stand (Snap)
• Available with LENTA U Ø89 column or LENTA Ø114 column
• Optional extra: LOCKT lockable bracket
• Also available in any RAL colour

MATERIALS:

• Hot-dip galvanised steel
• Also available in powder-coated, hot-dip galvanised steel

DIMENSIONS:

Columns, LENTA U: Ø89 mm
Columns, LENTA: Ø114 mm
Columns, Snap: Ø42 mm
Bars: Ø33 mm
Clamps: Ø16 mm
Standard distance between clamps: c/c 500 mm
Also available: c/c 600 mm

MODULE SIZES:

• Single-sided: 3, 4, 5 or 6 parking spots
• Double-sided: 6, 8 or 10 parking spots

INSTALLATION:

• Available for embedding or bolting to the foundation or wall mounting
• Recommended base dimensions: Ø300 x H600 mm
• Distance from ground to middle of clamp: 350 mm
• Distance from ground to lower edge of clamp: 170 mm

NOLI drawings

NOLI

  • 01_NOLI - tegning - 1

See project with NOLI

Se project here
Forgot your password?

|