Modular bike rack
HH20 with its slim, oval wheel holders is a quality bicycle rack that fits perfectly into a variety of settings.
The wheel holders are set at an angle and are therefore suitable for all tyre thicknesses. HH20 has been designed to accommodate wheel hubs with lights. The tall, oval profile of the wheel holders also saves on depth.
HH20 is also a harmonious and appealing bicycle rack. We can supply the rack in plain, galvanised steel or powder-coated in any RAL colour. There are countless installation options, each with its own look. As a result, HH20 bicycle parking products can be adapted to match the style of the particular business, housing association or municipality.
Many customers need to ensure they can provide adequate bicycle parking in the available space. And HITSA can help with that too. We have great systems in place for planning and installing optimum bicycle parking. Get in touch with our consultants, and we can help with the whole process from choice of modules through to installation. We carry out production in-house at our facilities in Latvia and Kolding, and this means that we can adapt our products as required to suit customer needs.
Our sturdy BOM model can be installed using a stand-alone SNAP bollard, attached to a wall or using bollards. The rack can be cemented in or bolted to the ground.
The distinctive BOM works well for demarcating different areas. SNAP, as an individual bollard, allows you to follow a curve or fit a stand into a corner.
HH20 is available as single-sided modules with 3, 4 or 5 spaces or double-sided modules with 6, 8 or 10 spaces. We have modules with 3, 4, 5 or 6 parking spaces for wall mounting. All models can be supplied with slanted wheel holders to make the most of the site’s depth.
The modular design means the installation can be adapted to suit the available area. This ensures the maximum number of bicycle spaces per square metre. The modules also allow for elegant symmetry. This could be around an entrance or alongside a path, for instance.
HH20 is made from galvanised steel, with optional powder coating, making it a durable rack for the Danish climate. It requires no maintenance.
The rack comes as standard with a centre-to-centre distance of 50 cm between the wheel holders. We can supply it in DGNB dimensions, which will typically be 60 cm between the wheel holders. DGNB is a sustainable building certification system. The requirement for bicycle racks is that they should make it easy and attractive for people to choose cycling rather than travelling by car.
Our HH20 bike rack is available as a HITSA-SAFE bike rack for hostile vehicle mitigation. HITSA-SAFE offers familiar urban furniture with a Nordic look, which is certified for hostile vehicle mitigation according to PAS 68 and IWA 14.
Technical drawings See drawings
HH20 BIKE RACK
• Single or double-sided bike rack
• Angled clamps that suit all types of tyre
• Allows room for lights on front wheel fork
• Modular, so can be assembled in the length required
• Available vertical (90°) or angled (45°)
• Also available as an individual stand (Snap)
• Also available in any RAL colour
• Hot-dip galvanised steel
• Also available in powder-coated, hot-dip galvanised steel
Columns: Ø89 mm
Bars: Ø35 mm
Clamps: Ø14 mm
Standard distance between clamps: c/c 500 mm
Also available: c/c 600 mm
Columns: Ø89 mm or 48 mm (for embedding)
• Single-sided: 3, 4, 5 or 6 parking spots
• Double-sided: 6, 8 or 10 parking spots
• Available for embedding or bolting to the foundation or wall mounting
• Recommended base dimensions: Ø300 x H600 mm
• Distance from ground to middle of clamp: 350 mm
• Distance from ground to lower edge of clamp: 200 mm
Modular bike rack
Bike rack with 3 & 4 racks
Biek rack with 5 & 6 racks
One-sided: 3, 4, 5 or 6 parking spots
One-sided: 2, 3, 4 or 5 parking spots (45°)
Double-sided: 4, 6, 8 or 10 parking spots
Double-sided: 4, 6, 8 or 10 parking spots, angled (45°)
6 parking spots for wall mounting
6 parking spots for wall mounting, angled (45°)
Individual stand for wall mounting
Individual stand for wall mounting, angled (45°)
Individual stand for embedding
Double-sided stand for embedding