CO5 Bike Rack

Design HITSA

The CO5 bicycle rack is an attractive, classic front-wheel rack with half-moon-shaped wheel holders that provide a very stylish look. The wheel holders are set at an angle, making them suitable for gripping all tyre thicknesses. The CO5 has also been designed to accommodate wheel hubs with lights.

The CO5 rack blends in perfectly with landscape architecture in front of commercial premises, libraries or housing association properties. It can also be installed in pedestrian zones and urban spaces with a focus on design and overall look. With its airy design and relatively high top strut, the CO5 can also be used to demarcate an area.

It can be powder-coated in any RAL colour, to coordinate more closely with the design style of a particular municipality or company.

Bicycle rack with DGNB (sustainability) dimensions

The CO5 can be installed in a variety of ways. Here at HITSA we have extensive experience of planning and installing bicycle parking facilities. We are happy to provide advice on how to make optimum use of the available space and create a harmonious look. Contact our consultants to find out more.

Our CO5 rack can be mounted on struts as single-sided modules with 3, 4, 5 or 6 spaces or double-sided modules with 6, 8 or 10 spaces. The modules can be combined. The modular design means the installation can be adapted to suit the available space. This ensures the maximum number of bicycle spaces per square metre. The modules also allow for elegant symmetry. This could be around an entrance or alongside a path, for instance.

The standard gap between parking spaces is 50 cm. We can also supply CO5 with a centre-to-centre distance of 60 cm, as recommended under DGNB sustainability certification. Generous spacing makes parking your bike more convenient and cycling more attractive as a result.

The CO5 can also be mounted on a wall or at an angle, if saving on depth is required.

We manufacture our products in-house at our own facilities in Kolding and Latvia. This means that we can adapt and customise products as required to suit customer needs.

Easy-to-maintain bicycle rack

The CO5 is made from hot-dip galvanised steel, which can subsequently be powder-coated in any RAL colour. Hot-dip galvanising followed by powder coating provides two layers of protection against rust and thus a longer useful life in all weathers. This airy rack is also easy to keep clean.

Contact us

Call us
Tel: +45 7557 4155

E-mail us at


Technical drawings See drawings


• Single or double-sided bike rack
• Angled clamps that suit all types of tyre
• Allows room for lights on front wheel fork
• Modular, so can be assembled in the length required
• Available vertical (90°) or angled (45°)
• Also available as an individual stand (Snap or wall)
• Also available in any RAL colour


• Hot-dip galvanised steel
• Also available in powder-coated, hot-dip galvanised steel


Columns: Ø89 mm
Bars: Ø35 mm
Clamps: Ø14 mm
Standard distance between clamps: c/c 500 mm
Also available: c/c 600 mm


• Single-sided: 3, 4, 5 or 6 parking spots
• Double-sided: 6, 8 or 10 parking spots


• Available for embedding or bolting to the foundation or wall mounting
• Recommended base dimensions: Ø300 x H600 mm
• Distance from ground to middle of clamp: 350 mm
• Distance from ground to lower edge of clamp: 130 mm

CO5 drawings


Modular bike rack

  • 01_CO5 - tegning - 1

CO5 2

Bike rack with 3 & 4 parking spots

  • 01_CO5 2 - tegning - 1

CO5 3

Bike rack with 5 & 6 parking spots

  • 01_CO5 3 - tegning - 1


Single-sided: 3, 4, 5 or 6 parking spots

  • 02_CO5 E - tegning - 1


Single-sided: 3, 4, 5 or 6 parking spots, angled (45°)

  • 03_CO5 ES - tegning - 1


Double-sided: 6, 8 or 10 parking spots

  • 04_CO5 D - tegning - 1


Double-sided: 6, 8 or 10 parking spots, angled (45°)

  • 05_CO5 DS - tegning - 1


6 parking spots, for wall mounting

  • 06_CO5 V - tegning - 1


6 parking spots, for wall mounting, angled (45°)

  • 07_CO5 VS - tegning - 1

CO5 snapE

Individual stand, for embedding

  • 08_CO5 snapE - tegning - 1

CO5 snapD

Individual stand, double-sided, for embedding

  • 09_CO5 snapD - tegning - 1
Forgot your password?