HH20 Bike Rack

Design HITSA

HH20 with its slim, oval wheel holders is a quality bicycle rack that fits perfectly into a variety of settings.

The wheel holders are set at an angle and are therefore suitable for all tyre thicknesses. HH20 has been designed to accommodate wheel hubs with lights. The tall, oval profile of the wheel holders also saves on depth.

HH20 is also a harmonious and appealing bicycle rack. We can supply the rack in plain, galvanised steel or powder-coated in any RAL colour. There are countless installation options, each with its own look. As a result, HH20 bicycle parking products can be adapted to match the style of the particular business, housing association or municipality.

Many customers need to ensure they can provide adequate bicycle parking in the available space. And HITSA can help with that too. We have great systems in place for planning and installing optimum bicycle parking. Get in touch with our consultants, and we can help with the whole process from choice of modules through to installation. We carry out production in-house at our facilities in Latvia and Kolding, and this means that we can adapt our products as required to suit customer needs.

Flexible bicycle rack

Our sturdy BOM model can be installed using a stand-alone SNAP bollard, attached to a wall or using bollards. The rack can be cemented in or bolted to the ground.

The distinctive BOM works well for demarcating different areas. SNAP, as an individual bollard, allows you to follow a curve or fit a stand into a corner.

HH20 is available as single-sided modules with 3, 4, 5 or 6 spaces or double-sided modules with 6, 8 or 10 spaces. We have modules with 3, 4, 5 or 6 parking spaces for wall mounting. All models can be supplied with slanted wheel holders to make the most of the site’s depth.

The modular design means the installation can be adapted to suit the available area. This ensures the maximum number of bicycle spaces per square metre. The modules also allow for elegant symmetry. This could be around an entrance or alongside a path, for instance.

Bicycle racks that fulfil DGNB (sustainability) requirements

HH20 is made from galvanised steel, with optional powder coating, making it a durable rack for the Danish climate. It requires no maintenance.

The rack comes as standard with a centre-to-centre distance of 50 cm between the wheel holders. We can supply it in DGNB dimensions, which will typically be 60 cm between the wheel holders. DGNB is a sustainable building certification system. The requirement for bicycle racks is that they should make it easy and attractive for people to choose cycling rather than travelling by car.

Get HH20 bike racks as a HITSA-SAFE product for hostile vehicle mitigation

Our HH20 bike rack is available as a HITSA-SAFE bike rack for hostile vehicle mitigation. HITSA-SAFE offers familiar urban furniture with a Nordic look, which is certified for hostile vehicle mitigation according to PAS 68 and IWA 14.

Contact us

Call us
Tel: +45 7557 4155

E-mail us at
hitsa@hitsa.com

Downloads

Technical drawings See drawings

HH20 BIKE RACK

• Single or double-sided bike rack
• Angled clamps that suit all types of tyre
• Allows room for lights on front wheel fork
• Modular, so can be assembled in the length required
• Available vertical (90°) or angled (45°)
• Also available as an individual stand (Snap)
• Also available in any RAL colour

MATERIALS:

• Hot-dip galvanised steel
• Also available in powder-coated, hot-dip galvanised steel

DIMENSIONS:

Columns: Ø89 mm
Bars: Ø35 mm
Clamps: Ø14 mm
Standard distance between clamps: c/c 500 mm
Also available: c/c 600 mm
SNAP version:
Columns: Ø89 mm or 48 mm (for embedding)

MODULE SIZES:

• Single-sided: 3, 4, 5 or 6 parking spots
• Double-sided: 6, 8 or 10 parking spots

INSTALLATION:

• Available for embedding or bolting to the foundation or wall mounting
• Recommended base dimensions: Ø300 x H600 mm
• Distance from ground to middle of clamp: 350 mm

HH20 drawings

HH20

Modular bike rack

  • 01_HH20 - tegning - 1

HH20 500 3-4

Bike rack with 3 & 4 racks

  • 02_HH20 500 3-4 - tegning - 1

HH20 500 4-5

Biek rack with 5 & 6 racks

  • 03_HH20 500 4-5 - tegning - 1

HH20 500 E

One-sided: 3, 4, 5 or 6 parking spots

  • 04_HH20 500 E - tegning - 1

HH20 500 ES

One-sided: 2, 3, 4 or 5 parking spots (45°)

  • 05_HH20 500 ES - tegning - 1

HH20 500 D

Double-sided: 4, 6, 8 or 10 parking spots

  • 06_HH20 500 D - tegning - 1

HH20 500 DS

Double-sided: 4, 6, 8 or 10 parking spots, angled (45°)

  • 07_HH20 500 DS - tegning - 1

HH20 500 V

6 parking spots for wall mounting

  • 08_HH20 500 V - tegning - 1

HH20 500 VS

6 parking spots for wall mounting, angled (45°)

  • 09_HH20 500 VS - tegning - 1

HH20 VE

Individual stand for wall mounting

  • 10_HH20 VE - tegning - 1

HH20 VES

Individual stand for wall mounting, angled (45°)

  • 11_HH20 VES - tegning - 1

HH20 snap89E

Individual stand for embedding

  • 12_HH20 snap89E - tegning - 1

HH20 snap89D

Double-sided stand for embedding

  • 13_HH20 snap89D - tegning - 1

HH20 snap48E

Individual stand for embedding

  • 14_HH20 snap48E - tegning - 1

HH20 snap48D

Double-sided stand for embedding

  • 15_HH20 snap48D - tegning - 1
Forgot your password?

|